語系:
繁體中文
English
簡体中文
說明(常見問題)
圖書館個人資料蒐集告知聲明
登入
建國科技大學自動化工程系暨機電光系統研究
書目資訊
水產養殖池溶氧遠端監控系統 = Internet-based Autom...
~
紀映帆
水產養殖池溶氧遠端監控系統 = Internet-based Automation Dissol
by:
紀映帆
輔以影像辨識之智慧型服務用機器人 = Applying the Imag...
~
陳廷詔
輔以影像辨識之智慧型服務用機器人 = Applying the Image Recognition for Intelligent Service Robot
by:
陳廷詔
隨身氧氣自動供給系統之設計研究 = Design Research on...
~
梁平偉
隨身氧氣自動供給系統之設計研究 = Design Research on Automatic Personal Oxygen Supply System
by:
梁平偉
模糊邏輯應用於保全接待機器人之設計研究 = Application of...
~
洪健富
模糊邏輯應用於保全接待機器人之設計研究 = Application of Fuzzy Logic in Security and Receptionist Robot Design
by:
洪健富
微型四旋翼垂直升降飛行載具之開發及飛試 = The Developmen...
~
張顥騫
微型四旋翼垂直升降飛行載具之開發及飛試 = The Development and Flight Test of Quad-Rotor Vertical Take-Off and Landing Micro Aerial Vehicle
by:
張顥騫
奈米銲錫突塊成長 = On the Preparation of the...
~
石馥嘉
奈米銲錫突塊成長 = On the Preparation of the Pb-free Nano-alloy
by:
石馥嘉
具旋轉之方柱鰭片散熱座在圓孔強制衝擊下噴流下之熱傳特性 = Therma...
~
廖宏儒
具旋轉之方柱鰭片散熱座在圓孔強制衝擊下噴流下之熱傳特性 = Thermal characteristtics of rotating pin-fin heat sinks subject to a circular impinging jet
by:
廖宏儒
阻絕層效應對於離子輔助蒸鍍氧化銦錫於高分子基板光電特性研究 = Rese...
~
陳嘉文
阻絕層效應對於離子輔助蒸鍍氧化銦錫於高分子基板光電特性研究 = Research for the effect of ZnO buffer layer on opto-electronic properties of ITO thin film by Ion-beam assisted evaporation on polyethersulfone substrate
by:
陳嘉文
氧化鈦薄膜的光學性質之研究 = The investigation fo...
~
洪瑗焄
氧化鈦薄膜的光學性質之研究 = The investigation for Optical Properties of Titanium Oxide Films
by:
洪瑗焄
無人飛行載具及輕航機主起落架開發 = Main Landing Gear...
~
朱哲漢
無人飛行載具及輕航機主起落架開發 = Main Landing Gear Developm for Ultra-light Aircraft &Unmanned Aerial Vehicles
by:
朱哲漢
徑向矩型旋轉流道之流場可視化研究 = A Syudy of the Fl...
~
黃苹睿
徑向矩型旋轉流道之流場可視化研究 = A Syudy of the Flow Visualization Technology of the Radically Rotating Rectangular Channel
by:
黃苹睿
玻璃抗紫外線及紅外線研究分析與節能評估 = Research,analy...
~
呂佳勳
玻璃抗紫外線及紅外線研究分析與節能評估 = Research,analysis the glass to protect ultraviolet rays and infrared rays,toevaluate saved energy ability
by:
呂佳勳
研磨加工參數最佳化之研究 = Study on Optimization...
~
粘文聰
研磨加工參數最佳化之研究 = Study on Optimization of Grinding
by:
粘文聰
無人飛行載具及輕航機複合材料機翼結構設計 = Composute Win...
~
李詩寧
無人飛行載具及輕航機複合材料機翼結構設計 = Composute Wing Structure Design for Unmanned Aerial Vehicle and Light Aircraft
by:
李詩寧
應用類神經網路於無人飛機主起落架地面校正試驗數據之分析 = The Da...
~
江孟潔
應用類神經網路於無人飛機主起落架地面校正試驗數據之分析 = The Data Analysis of Ground Calibration Test for Main Landing Gear of Unmanned Aerial Vehicle Using Artificial Neural Networks
by:
江孟潔
方柱鰭片散熱座於矩形槽道流中之強制熱對流特性 = Forced Conv...
~
曹詠植
方柱鰭片散熱座於矩形槽道流中之強制熱對流特性 = Forced Convective Characteristics of Square Pin-Fin Heat Sinks in ARectangular Channel
by:
曹詠植
塑膠薄殼件模具生產條件最佳化研究-以數位相機為例 = The study...
~
李智齊
塑膠薄殼件模具生產條件最佳化研究-以數位相機為例 = The study of optimal production process on plastic mold-Application of digital camera housing
by:
李智齊
數位化網格模型在工業應用上之研究-以玩具公仔為例 = The study...
~
林秉彰
數位化網格模型在工業應用上之研究-以玩具公仔為例 = The study ofapplying digital mesh models to industry-the application of toy figurihes
by:
林秉彰
多標的車牌辨識系統之研製 = Development of a Reco...
~
賴琮凱
多標的車牌辨識系統之研製 = Development of a Recognition System for Multi-Target Vehicle License Plates
by:
賴琮凱
開孔式發泡鋁的機械行為與熱物理以及熱傳導性質之實驗研究 = An Exp...
~
張義全
開孔式發泡鋁的機械行為與熱物理以及熱傳導性質之實驗研究 = An Experimental Study of Closed-Cell Al Foams on Mechanical Behavior Thermophysical and Heat Transfer Properties
by:
張義全
廣波域之可見光區抗反射蒸鍍研究 = Broadband Antirefl...
~
林錦瑩
廣波域之可見光區抗反射蒸鍍研究 = Broadband Antireflection Coating Designs over the Visible Spectral Region
by:
林錦瑩
聚乳酸分解性塑膠之射出成型特性研究 = injection moldin...
~
張振瑋
聚乳酸分解性塑膠之射出成型特性研究 = injection molding characterization of Polylactic Acid (PLA)
by:
張振瑋
電晶體式氫氣感測器及其參數萃取之研究 = Investigation o...
~
張瑞銜
電晶體式氫氣感測器及其參數萃取之研究 = Investigation of Transistor-type Hydrogen Sensor and its Parameters Extraction
by:
張瑞銜
分析純尼龍與奈米龍在不同射出成型條件下對鋼珠保持器的收縮率影響 = st...
~
廖釗諄
分析純尼龍與奈米龍在不同射出成型條件下對鋼珠保持器的收縮率影響 = study the Influence of Injection Parameters on the Dimensional Shrinkage of the Retainer with Nylon-66 and Nylon 6-Clay Nanocomposites
by:
廖釗諄
電動車之智慧型電源管理系統 = Intelligent Power Ma...
~
簡志鵬
電動車之智慧型電源管理系統 = Intelligent Power Management Systtems For Electric Vehicles
by:
簡志鵬
遠端無線傳輸及無線遙控技術應用於農業生產管理之技術 = The Stud...
~
羅瑞議
遠端無線傳輸及無線遙控技術應用於農業生產管理之技術 = The Study of a Wireless Transmitting and Wireless Remote Control Technology Apply to the Agricultural Production Management.
by:
羅瑞議
以三相母線阻抗分佈因子法求解配電系統饋線流量之研究 = Study of...
~
古煜達
以三相母線阻抗分佈因子法求解配電系統饋線流量之研究 = Study of the Line Flow of Distribution Systems via Three-Phase Bus Impedance Distribution Factor
by:
古煜達
刀具切削壽命最佳化參數探討 = A Study of Optimizat...
~
梁榮濱
刀具切削壽命最佳化參數探討 = A Study of Optimization Paramete for Tool Life
by:
梁榮濱
銅箔基板厚度之量測分析研究 = Anylysis of Measurem...
~
洪建芳
銅箔基板厚度之量測分析研究 = Anylysis of Measurement Systems for the Thickness of Copper Cladding Laminate
by:
洪建芳
水產養殖池溶氧遠端監控系統 = Internet-based Autom...
~
紀映帆
水產養殖池溶氧遠端監控系統 = Internet-based Automation Dissolved Oxygen Monitoring and Control System in Case Study of Aquafarm
by:
紀映帆
可調式座椅支撐性及舒適性之探討 = The Study of suppo...
~
陳映旭
可調式座椅支撐性及舒適性之探討 = The Study of supporting and comfortable in adjustable seat
by:
陳映旭
語音辨識自動調變吸塵車設計 = Design of an Automat...
~
許旭忠
語音辨識自動調變吸塵車設計 = Design of an Automatic-TuningVacuum Cleaner Applying Voice Recognition Technology
by:
許旭忠
疊紋偏向法量測氧化鈦薄膜非線性折射率之研究 = Nolinear Ref...
~
陳信志
疊紋偏向法量測氧化鈦薄膜非線性折射率之研究 = Nolinear Refraction Measurements of Titanium Oxide Films Using the Moire Deflectometry
by:
陳信志
多孔性金屬發泡散熱座的空間熱管理之實驗研究 = Experimental...
~
陳慧穎
多孔性金屬發泡散熱座的空間熱管理之實驗研究 = Experimental Study of Spatial Thermal Regulation of Aluminum Foam Heat Sink
by:
陳慧穎
酚醛樹脂RTM製程於座椅構件應用研究 = The Study of Co...
~
蔣文彬
酚醛樹脂RTM製程於座椅構件應用研究 = The Study of Composite Structures of Chairs by Phenolic Resin Transfer Molding Processes
by:
蔣文彬
堆疊銅粒密實床於侷限式矩形噴流下之熱流特性實驗研究 = Fluid Fl...
~
張家維
堆疊銅粒密實床於侷限式矩形噴流下之熱流特性實驗研究 = Fluid Flow and Heat Transfer Characteristics in the Copper-Beads Packed Beds under a Confined Rectangular Air Jet
by:
張家維
具旋轉之發泡鋁材散熱座在圓孔衝擊噴流下之熱傳特性 = Thermal c...
~
劉東春
具旋轉之發泡鋁材散熱座在圓孔衝擊噴流下之熱傳特性 = Thermal characteristics of rotaing aluminum-foam heat sinks subject to a circular impinging jet
by:
劉東春
廣角度廣波域可見光區抗反射之設計研究 = Research for th...
~
王紹奎
廣角度廣波域可見光區抗反射之設計研究 = Research for the Design of wide Angle Broadband Antireflection Coating over the Visible Spectral Region
by:
王紹奎
應用模糊與田口方法尋求光學投影研磨之最佳操作參數 = Applicati...
~
余憲宗
應用模糊與田口方法尋求光學投影研磨之最佳操作參數 = Application of Fuzzy Taugchi Methods to Find the Optimal Operation Parameters of Optical Profile Grinding
by:
余憲宗
水產養殖池溶氧遠端監控系統=Internet-based Automat...
~
紀映帆著
水產養殖池溶氧遠端監控系統=Internet-based Automation Dissol
by:
紀映帆著
光纖透鏡與微透鏡陣列應用於LED均勻化之研究 = Improved th...
~
黃宏琳
光纖透鏡與微透鏡陣列應用於LED均勻化之研究 = Improved the Uniform lighting for LED Light Sources By The Fiber Lenses and Micro-Lens Array
by:
黃宏琳
高血壓和虹膜周圍環狀白霧之關聯性研究 = The Association...
~
莊明裕
高血壓和虹膜周圍環狀白霧之關聯性研究 = The Association between Hypertension and White Ring around Iris
by:
莊明裕
PEMFC性能估測與應用之研究 = The Study of Perfo...
~
郭子維
PEMFC性能估測與應用之研究 = The Study of Performance Estimation and Application on PEMFC
by:
郭子維
具超級電容與太陽能輔助式電動車 = The Electric Vechi...
~
洪文燦
具超級電容與太陽能輔助式電動車 = The Electric Vechicle withSo
by:
洪文燦
酚醛樹脂複合材料於航空座椅構件之設計與分析研究 = Research f...
~
林似諭
酚醛樹脂複合材料於航空座椅構件之設計與分析研究 = Research for Design and Analysis of Aircraft Seat Component in Phenolic Resin Compound Material
by:
林似諭
智慧型監控應用於航空器發動機 = Applying the Intell...
~
張志銘
智慧型監控應用於航空器發動機 = Applying the Intelligent Monit
by:
張志銘
車輛排氣熱能回收系統之噪音與熱流特性實驗研究 = Experimenta...
~
吳明潮
車輛排氣熱能回收系統之噪音與熱流特性實驗研究 = Experimental Study of Noise and Thermal-fluid Characteristic for Heat Recovery System of Vehicle Exhaust
by:
吳明潮
應用有限元素法於無刷馬達之最佳化分析 = The Optimal Des...
~
陳家榕
應用有限元素法於無刷馬達之最佳化分析 = The Optimal Design of Brushless Motor Based on FEM Computation
by:
陳家榕
酚醛樹脂轉注成型製程研究 = The Study for Phenoli...
~
陳世浩
酚醛樹脂轉注成型製程研究 = The Study for Phenolic Resin Transfer Molding Process
by:
陳世浩
輕型飛機螺旋槳複材結構製程研究 = The study on proce...
~
許世逸
輕型飛機螺旋槳複材結構製程研究 = The study on process develop for composite propeller for light aircrafts
by:
許世逸
MPLS效能提升之探討 = The enhancement of MPL...
~
游成吉
MPLS效能提升之探討 = The enhancement of MPLS performance : 碩士論文
by:
游成吉
即時人臉偵測系統之研究 = A Study of Real-time F...
~
林忠毅
即時人臉偵測系統之研究 = A Study of Real-time Face Detectioud Systems
by:
林忠毅
網路式影像監控系統之研究 = Internet-based Image ...
~
熊俊智
網路式影像監控系統之研究 = Internet-based Image Surveillance Systems
by:
熊俊智
疊紋技術應用於凸透鏡焦距之量測 = Focal Length Measu...
~
郭天賜
疊紋技術應用於凸透鏡焦距之量測 = Focal Length Measurement for Convex Lens Using Moire Technology
by:
郭天賜
以熔燒式、漸變折射率式與點膠式製作光纖透鏡之準直特性之研究 = The ...
~
姚志賢
以熔燒式、漸變折射率式與點膠式製作光纖透鏡之準直特性之研究 = The collimated characteristic improvement of fiber lenses for long-distance application using,gradient index and UV-curable methods
by:
姚志賢
碳纖維複合材料應用於醫療床板之研究 = A Study of Medic...
~
王秋蓉
碳纖維複合材料應用於醫療床板之研究 = A Study of Medical bedboard of Carbon Fiber Composite Material
by:
王秋蓉
應用倒傳遞類神經網路於車牌辨識系統 = Applying the Bac...
~
李建德
應用倒傳遞類神經網路於車牌辨識系統 = Applying the Back Propagation Neural Network to the License Plate Recognition System.
by:
李建德
以賈可比矩陣基礎分布因子快速求解電力系統母線電壓大小與相角 = Fast...
~
林暐翔
以賈可比矩陣基礎分布因子快速求解電力系統母線電壓大小與相角 = Fast Computations of Power System Bus Voltage Magnitudes and Phase Angles by Jacobian Based Distribution Factor
by:
林暐翔
含鋯和氮類鑽碳薄膜之微鑽針高速鑽削性能及微孔品質研究 = The stu...
~
江彥明
含鋯和氮類鑽碳薄膜之微鑽針高速鑽削性能及微孔品質研究 = The study of high speed micro-drilling performance and hole quality of diamond-like carbon coatings by doping with zirconium and nitrogen
by:
江彥明
軟性印刷電路板在沖孔加工後之微觀觀測及檢驗分析 = Microscopi...
~
張堃泉
軟性印刷電路板在沖孔加工後之微觀觀測及檢驗分析 = Microscopic Observation and Inspect Analysis for a Blanking Processed Hole on a Flexible Printed Circuit Board.
by:
張堃泉
多功能新型絡筒機的研發 = Research and Developme...
~
林俊男
多功能新型絡筒機的研發 = Research and Development of Multi-Fu
by:
林俊男
無人飛機及輕航機主起落架地面校正試驗 = Ground Cailbrat...
~
黃建富
無人飛機及輕航機主起落架地面校正試驗 = Ground Cailbration Test on the Landing Gear of the Unmanned Aerial Vehicles and Light Aircrafts
by:
黃建富
顏色、材質、角度和環境光對光學掃描品質影響之研究 = The study...
~
林嘉洪
顏色、材質、角度和環境光對光學掃描品質影響之研究 = The study of 3D scanning quality under the effect of color, material,inclined angle,and environment light
by:
林嘉洪
處理中
...
變更密碼
登入